Read the case study titled “GE Healthcare (A): Innovating for Emerging Markets” located in the XanEdu case pack (Link Below)
Write a three to four (3-4) page paper in which you:
Determine two (2) emerging trends in the external environment that prompted General Electric (GE) Healthcare to develop a new strategy for the production and marketing of a low cost Electroencephalography (EEG) machine in bottom of the pyramid markets (BOP). Examine two (2) internal barriers GE Healthcare faced when developing its BOP market in India and determine the manner in which they hindered GE Healthcare’s growth in this market segment. Analyze two (2) of the significant external barriers that GE Healthcare faced when trying to meet its marketing goals in the Indian market. Propose two (2) ways to address these barriers. Analyze the specific steps GE took in developing its strategy to grow its BOP market. Determine the manner in which those actions apply to the principles of strategic thinking and strategic planning. Determine the manner in which GE Healthcare’s strategy to improve its position in BOP markets contributed to the organization’s value chain in both emerging and developed markets. Your assignment must follow these formatting requirements: Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions. Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length. The specific course learning outcomes associated with this assignment are: Differentiate between strategic management, strategic thinking, strategic planning, and managing strategic momentum. Analyze the significance of the external environment’s impact on health care organizations. Examine the role of internal environmental analysis in identifying the basis for sustained competitive advantage. Examine the organizational value chain, including the components of the service delivery and support activities. Examine barriers to new product development that comply with initiatives in the health care industry. Use technology and information resources to research issues in the strategic management of health care organizations. Write clearly and concisely about strategic management of health care organizations using proper writing mechanics.
GE Healthcare (A):
Innovating for Emerging Markets
This case was written by Jasjit Singh, Associate Professor of Strategy at INSEAD. It is intended to be used as a basis for class discussion rather than to illustrate either effective or ineffective handling of an administrative situation.
Copyright © 2011 INSEAD
TO ORDER COPIES OF INSEAD CASES, SEE DETAILS ON THE BACK COVER. COPIES MAY NOT BE MADEWITHOUT PERMISSION. NO PART OF THIS PUBLICATION MAY BE COPIED, STORED, TRANSMITTED, REPRODUCED OR DISTRIBUTED IN ANY FORM OR MEDIUM WHATSOEVER WITHOUT THE PERMISSION OFTHE COPYRIGHT OWNER.
“If GE doesn’t come up with innovations in poor countries and take them global, the new competitors from the developing world will… GE has tremendous respect for traditional rivals like Siemens, Philips, and Rolls-Royce. But it knows how to compete with them; they will never destroy GE. By introducing products that create a new price-performance paradigm, however, the emerging market giants very well could. Reverse innovation isn’t optional; it’s oxygen.”
GE CEO Jeffrey Immelt, and co-authors1
As of 2010, GE Healthcare was a $17 billion division of the $180 billion giant General Electric, employing over 46,000 people worldwide. It was created in 2004 after GE Medical Systems was merged with British bioscience/medical imaging firm Amersham and several healthcare IT firms as a part of CEO Jeffrey Immelt’s increased emphasis on R&D.2
GE Healthcare had a strong track record in selling high-end medical imaging and diagnostic products globally. It operated in India as Wipro GE Healthcare, a 51:49 joint venture with Wipro. Partnering with a leading Indian company had helped GE address the regulatory constraints and institutional complexities of operating in India as a foreign multinational.3
India as a Base for Global R&D
GE had four major sites for its R&D efforts: the U.S. (Niskayuna), India (Bangalore), China (Shanghai) and Europe (Munich). Additional research centres in Brazil (Sao Paulo) and the U.S. (Detroit) were also being considered. In locating R&D overseas its chief considerations were availability of talent and being close to important markets.
The John F. Welch Technology Centre (JFWTC) in Bangalore was GE’s largest R&D centre outside the U.S. Opened in 2000, the $175 million centre had grown to about 4,300 technologists (about 1,100 in Healthcare) by 2010.4 India was an attractive base not just for cost reasons but also for an ample supply of world-class talent and the presence of some well-known educational and research institutions in an otherwise relatively less developed country.
JFWTC carried out R&D for GE businesses in areas as diverse as healthcare, energy, aviation and transportation. Its traditional focus had been addressing the needs of developed market customers. However, there was now an increasing emphasis also on products tailored for emerging markets like India, including those developed specifically for particularly low-income customers (the so-called “bottom of the pyramid” or BOP).5
India as a Healthcare Market
As of 2010, India’s healthcare industry was worth about $30 billion and was expected to double in size in the next five years. Estimates put the medical devices market segment somewhere in the $3 billion to $6 billion range, with growth of between 10% and 15% a year.
Of the 700 domestic healthcare device makers in India, most only made low-value products such as needles and catheters. Of the few that did produce more sophisticated equipment, few could match international players in terms of quality or performance. Nevertheless, they typically had a significant cost advantage, which made them formidable competitors in mass markets where customers had limited purchasing power and were highly price sensitive.
High-quality specialist products came mainly from MNCs like GE, Siemens and Philips, with GE being the #1 provider of diagnostic equipment like ECG, MRI, CT and ultrasounds. Given the price points, however, most of the $400-500 million annual revenue of GE Healthcare in India had come from sales to large hospitals.6
GE Healthcare had recently launched a global $6 billion “Healthymagination” campaign, with stated goals of reducing the cost, increasing access and improving the quality of healthcare around the world. This included significant investment in solutions for BOP patients.7 In addition to providing growth opportunities and building new capabilities for emerging markets, this was expected to be good for GE’s corporate social responsibility (CSR) image.
GE Organization in India
In 2005, GE had set a revenue goal for India of $5 billion across all businesses by 2010. But it had actually realized less than $3 billion by 2010. Within the Healthcare division, India still accounted for less than 2% of revenues. Recognizing that this fell far short of potential, Immelt set an ambitious 30% annual growth target for GE India over the next five years in order for the Indian business to cross the $10 billion mark by 2015.8
A key barrier to GE’s growth in India had been its inability to fully tap into the mass market. Since sales from India comprised a tiny fraction of overall sales, the idiosyncratic needs of the Indian market did not get much attention in the highly centralized global organization. As a result, even R&D initiatives carried out in India had a tendency to gravitate towards meeting the needs of the relatively high-end segments that resembled GE’s developed market customers. A senior leader at GE Healthcare summarized the problem: “We were selling what we were making [rather than] making what the customers here needed.”9
To overcome the above challenges, GE introduced a new “in country, for country” strategy for India. This involved two key changes in the organizational structure. First, on the geographic dimension of the organizational matrix, India was now to be treated as an independent region (on a par with the U.S. and China). As a former GE Healthcare employee put it, “In our global meetings, India overnight went from getting only two slides in the GE International presentation to getting a whole presentation on its own.”
The second organizational change was that GE India was the first country to be made a profit and loss centre on its own. The Indian business heads were to now report primarily to the country CEO, with only a dotted-line link to the global business heads. Immelt said: “We will treat GE India just as we would any other GE business with its own growth strategy, leadership development and budgeting processes.” Managing the entire local value chain from India itself was expected to improve local adaptation and speed up decision-making. 10
The 39-year old T.P. Chopra – an Indian who had been the country CEO in the old organization – was replaced by John Flannery, a senior vice-president from GE’s global leadership team. With the new CEO being well-connected with GE’s global business heads, it was hoped that decentralization of decision-making would not compromise on global integration of strategy and knowledge exchange would still take place across boundaries.
Rather than making development of “value-for-money” products targeting low-income markets also a responsibility for existing R&D teams, GE set up new product teams specifically for developing and commercializing such solutions. The local boost for R&D was complemented by enhanced efforts in local marketing, sourcing, manufacturing and service. Aggressive growth targets were set for adapting better to the Indian market, while also cutting costs drastically and achieving speedier decision-making through decentralization.11
A New ECG Device for India?
GE’s Healthcare division was an early adopter of the new “in India, for India” approach, with several new initiatives in this spirit having been started even before the new organization was fully in place, as was illustrated by GE’s efforts to develop inexpensive electrocardiogram (ECG) products specifically with the Indian market in mind.
A major cause of death in India is heart disease, making ECG testing of tremendous value in early detection. But as mainstream ECG machines (such as the MAC 5500 machine shown in Exhibit 1, priced at over $10,000) were designed to meet the needs and budgets of large modern hospitals, they only skimmed the top of the Indian market.
With per capita income just over $1,000 per annum, few Indians could afford expensive testing using high-end machines. However, affordability was not the only issue. People living in small towns and rural areas lacked easy access to hospitals. Simply producing stripped-down versions of GE’s existing products would therefore not suffice. There were unique challenges of the BOP to bear in mind.
The MAC 400 ECG
GE management assigned the task of designing an ECG solution for India to the JFWTC. Using local R&D turned out to have three benefits. First, the team had a better knowledge of Indian customers. Second, it had greater awareness of off-the-shelf components available locally. Third, development costs were much lower than for an equivalent project in the U.S.
An ECG device targeting the BOP – called the MAC 400 (see Exhibit 2) – was developed in just 22 months, with development costs of about $500,000. (A similar global product development effort could have taken twice as long and cost several million dollars.) The device was small enough to fit in a backpack. At 1.3kgs it was much lighter than conventional models, which often weighed over 7kgs. It had rechargeable batteries that could be charged in three hours and allowed over 100 ECGs, or a week of operation, between charges.
The expensive printer typical of classic ECG machines was replaced by a small printing gadget adapted from a model used for portable ticket machines. The traditional 12-channel printer output in high-end ECGs was replaced by a three-channel output in the MAC 400. The full-scale keyboard was replaced by just four buttons, and the large graphical colour display by a small text-only display used for set-up. The machine had a simple one-touch operation, with embedded software interpreting the ECG data to print out a simple easy-to-read intuitive report. This eliminated the need for a cardiologist to tell whether a patient had a heart condition and needed to see a specialist.
Importantly, the relentless focus on eliminating non-core features found in high-end ECG machines (such as on-screen display, advanced analysis, full network connectivity and interoperability, barcode and magnetic card scanning, data storage and export, security, etc.) did not mean that the development team compromised on the core functionality. Employing the industry-standard Marquette 12SL algorithm that all GE’s ECG machines used, the analysis performed by the MAC 400 was as reliable as that of a full-scale ECG device.12
The MAC 400 was priced around $1,000, a third of the price of medium-sized conventional devices and under a tenth of many full-size models.13 The effective cost of a single electrocardiogram turned out to be less than $1, which was considered low enough for widespread adoption. Although the margins in selling MAC 400 were smaller than those on high-end equipment, GE hoped that the sales volume would justify the product nevertheless.
Some cost reductions naturally resulted from making a smaller size device with limited features, but savings also resulted from the creative use of standard parts available locally. Instead of using a customized processing chip, the R&D team came up with a clever solution relying upon a commercial chip that cost only a quarter of the price. Similarly, rather than developing a customized printer the team adapted one widely used in bus terminal kiosks.
As the MAC 400 was being developed, the local R&D team had access to all of GE’s accumulated knowledge. For example, by borrowing a process originating elsewhere for building fast plastic-mould prototypes, the team was able to avoid costly changes later by getting early feedback from doctors. Similarly, it was able to take GE’s past experience in developing printers for dusty conditions and fine-tune the printer’s suitability for ECG.
Describing the full potential of ultra-portable ECG devices like the MAC 400, a senior official at the JFWTC said, “It will become the stethoscope of cardiologists.”14 According to another official, “The dream would be to sell at least one device to each GP (general practitioner).”15
For cost-effective distribution, GE hoped to rely not just upon the network from its JV with Wipro but also to explore novel partnerships with pharmaceutical companies, surgical companies and large pharmacies. To educate potential customers it conducted courses on the technical aspects of using an ECG device as well as making the business case for investing in one. To help potential buyers overcome financing constraints, it tied up with State Bank of India, whose extensive rural network was used to arrange no-interest loans for buyers.
At the time when the MAC 400 project was initiated, GE had limited market research and distribution channels in place for the new customers it was trying to reach. Therefore, rather than evaluating the project purely on a financial basis, the company viewed it also as an experiment into the BOP opportunity more broadly and as a way to build resources and capabilities for the future. Other product categories where GE Healthcare was similarly trying to tap into low-income markets included baby warmers, X-ray and ultrasound systems.
As an experiment, the MAC 400 turned out to be a success not only in India but also in numerous countries worldwide where it was in fact often sold at higher price points. Even commercially, MAC 400 became a reasonable success by generating $20 million in revenues within the first two years. This was still a small fraction of the revenues for GE Healthcare as a whole, no surprise given that it was an early foray for GE into an unfamiliar market and that the entire ECG category anyway was a small part of the overall healthcare portfolio.
While GE’s long-term vision was to use products like the MAC 400 to create new markets, practical constraints in terms of channels meant that a significant fraction of the initial sales actually took place within the traditional customer segments. It became clear that realizing the full potential of the BOP opportunity would depend not just on having the right product but also continuing to build appropriate sales, distribution and service networks. Also, a truly mass-market product would have to be even cheaper than the MAC 400 in order to compete against current and future offerings from low-cost Indian manufacturers like BPL Healthcare.
Relying upon the MAC 400 experience and extensive market research, GE subsequently came up with a cheaper ECG device, the MAC i (“i” standing for India), that weighed less than 1kg, used a single-channel printer output and eliminated even PC connectivity. Launched in November 2009, it was priced at just $500. Like its predecessor, MAC i was manufactured locally using local components, while continuing to use reliability, user friendliness and interpretation software as differentiating elements.16Early market indications were that MAC i would do quite well commercially.
The MAC 800 ECG
While the MAC 400 was being developed in India, GE’s R&D personnel in China built upon the idea to develop another portable ECG – the MAC 800 (see Exhibit 3). The new product targeted not only remote locations but also the typical clinics and hospitals in China.
Weighing 3kg, the MAC 800 was larger than the MAC 400, though still much smaller than GE’s high-end ECG machines. Recognizing China’s familiarity with SMS-texting, it incorporated a telephone-style keypad to allow users to input data. It included a full-size colour display (with multiple language options) based on an intuitive Windows-based platform, offering a preview of ECG results. It also allowed ECG data to be stored and sent.
The product design, the pricing strategy and the channels GE Healthcare relied upon to distribute MAC 800 exploited the fact that higher local income levels as well as greater involvement of the government in healthcare standard-setting and purchasing decisions led to lower price sensitivity in China than in India and opened up a different kind of opportunity.
Costing around $2,500, the MAC 800 was over twice as expensive as the MAC 400, but still less than one third of GE’s high-end ECGs.17 Early indications were that it was selling well, exceeding 20,000 installations in more than 50 countries as of 2010.18
In an interesting development, GE started selling the MAC 800 even in developed markets. While it held a 34% share of the U.S. mainstream ECG market, GE saw an opportunity to use the MAC 800 to expand the ultrasound market to include primary care doctors, rural clinics, emergency rooms and accident sites.19 Market studies revealed that U.S. physicians found the device user-friendly, and considered its SMS texting-style keypad acceptable.20 The U.S. market was found to have greater connectivity requirements than those offered by the Chinese prototype, but GE was able to address that through adaptations like USB and Ethernet ports.
For a company that primarily sold products developed for developed economies in emerging markets, this exemplified a reversal in the direction in which innovation flowed. The phenomenon was labelled “reverse innovation” by Immelt, who considered such an approach critical to the very survival of Western multinational fighting the threat of emerging market companies going global with their own disruptive business models. 21
The Right Global Strategy?
Although GE earned favourable press coverage and several awards for its innovative BOP products, it was too early to declare its BOP initiatives a big commercial success because the revenues generated were still small by GE standards, margins were thinner than GE was used to, and the competition was starting to heat up.
Sceptics wondered whether GE really had a sound long-term strategy, especially as the competitive advantage in serving BOP markets was unclear. Past successes had come from delivering standardized products globally, relying upon scale to drive down costs and tight organization to ensure control. For the company to move towards an “in country, for country” approach for specific countries seemed far from the obvious direction to take.
- CLICK HERE AND ORDER NOW……………………….